4 inch wafer

Short Name:

The following is a list of equipment where 4 inch round substrates are allowed.

Equipment name & NEMO ID	Training Required & Charges	Cleanliness	Location	Notes
KJL Evaporator 1	KJL Evaporator 1 Training		SNSF NPC Spilker suite 6
PDS 2010 LABCOTER™ 2 Parylene Deposition System parcoater	Parylene Coater Training	Flexible	SNF Exfab Paul G Allen 155 Mavericks
Aixtron MOCVD - III-N system aix-ccs	MOCVD - III-N Aixtron training	Clean (MOCVD)	SNF MOCVD Paul G Allen 213XA	N and P doping available. For Si clean: SC1, SC2, HF dip. For Sapphire clean: SC1, SC2. For GaN template on Si or Sapphire: Piranha, SC1, SC2.
Aixtron MOCVD - III-V system aix200	MOCVD - III-V Aixtron training	Flexible	SNF MOCVD Paul G Allen 213XA	N and P doping available. For Si clean: SC1, SC2, HF dip. For III-V clean: HCl or HF dip.
First Nano carbon nanotube CVD furnace cvd-nanotube	cvd-nanotube training	Flexible	SNF Exfab Paul G Allen L119 Año Nuevo	Aligned single-walled carbon nanotube growth with ST-cut quartz substrates (available from SNF stockroom);1-15 single-walled carbon nanotubes per micron density
Aixtron Black Magic graphene CVD furnace aixtron-graphene	CVD graphene furnace Aixtron Black Magic training	Flexible	SNF Exfab Paul G Allen L119 Año Nuevo
Plasmaetch PE-50 plasma-etch	Plasmaetch PE-50 Training	Flexible	SNF Exfab Paul G Allen 155A Venice	Low power, high pressure plasma; low bias, minimal damage. Often used for surface treatment.
Lesker Sputter lesker-sputter	Sputter Lesker 1&2 Training	Flexible	SNF Exfab Paul G Allen 155A Venice	reactive O2/N2 sputtering, substrate bias, substrate heating, co-sputter
AJA Evaporator aja-evap	Evaporator AJA training	Flexible	SNF Exfab Paul G Allen 155A Venice	For more than 300nm deposition, please contact Graham Ewing<grahamj.ewing@stanford.edu> in advance
DISCO Wafer Saw DISCO wafersaw	Wafersaw DISCO training	Flexible	SNF Exfab Paul G Allen 159 Capitola
micromanipulator6000 IV-CV probe station micromanipulator6000	micromanipulator6000 IV-CV probe station Training	"All"	SNF Exfab Paul G Allen 151 Ocean
Sinton Lifetime Tester sinton-lifetime-tester	Sinton Lifetime Tester Training	Flexible	SNF Exfab Paul G Allen 151 Ocean
LEI1500 Contactless Sheet Resistance Mapping eddycurrent	LEI1500 Contactless Sheet Resistance Mapping Training	"All"	SNF Exfab Paul G Allen 151 Ocean
Wet Bench Flexcorr 2 wbflexcorr-2	Wet Bench Flexcorr 1and2 and 3and4 Training	Flexible	SNF Paul G Allen L107 Cleanroom	Manual wet etching of non-standard materials. Hot pots available. GaAs allowed in personal labware only
Gasonics Aura Asher gasonics	Resist Removal Dry Gasonics Training	Clean, Semiclean	SNF Paul G Allen L107 Cleanroom	Single wafer tool with auto loading from a cassette. Pieces need a pocket carrier wafer for transport. Wafers heated by lamps.
Oven 110°C post-bake oven110	Resist Postbake Oven 110°C Training	"All"	SNF Paul G Allen L107 Cleanroom	Bakes wafers with resist after the development, called post-bake.
Wet Bench Clean 2 wbclean-2	Wet Bench Clean1and2 Training	Clean	SNF Paul G Allen L107 Cleanroom	No resist allowed. Resist should have been removed at the wbclean_res-piranha
Tystar Bank 2 Tube 5 B2T5 Clean Anneal	Tystar Atmospheric Tube Training	Clean	SNF Paul G Allen L107 Cleanroom
Oxford Plasma Pro PECVD Ox-PECVD	Oxford Plasma Pro PECVD Training	Semiclean, Flexible	SNF Paul G Allen L107 Cleanroom
Fiji 2 ALD fiji2	ALD Fiji 1 and 2 Training	Flexible	SNF Paul G Allen L107 Cleanroom

Pages

Equipment name & NEMO ID	Technique	Cleaning Required	Cleanliness	Primary Materials Etched	Other Materials Etched	Material Thickness Range	Materials Lab Supplied	Exposure Wavelength	Mask Size	Resist	Developer	Process Temperature Range	Chemicals	Gases	Substrate Size	Substrate Type	Maximum Load
Aixtron Black Magic graphene CVD furnace aixtron-graphene	Deposition > Chemical Vapor Deposition (CVD) > Graphene CVD Growth		Flexible				C					800 °C - 1100 °C		78% N₂, 21% O₂, ~1% Ar CH₄ H₂	Pieces 2" 3" 4"	(Si) , (Various)	1x4" wafer or Copper/Nickel foil
Aixtron MOCVD - III-N system aix-ccs	Deposition > Chemical Vapor Deposition (CVD) > Metal-Organic (MO) CVD		Clean (MOCVD)			0.00 - 5.00 μm	AlGaN AlN GaN III-N materials InAlN InGaAlN InGaN InN					400 °C - 1300 °C		H₂ MO sources N₂ NH₃ SiH₄	Pieces 2" 4"	(Si) , (Al₂O₃) , (SiC) , (GaN)	4"x1, 2"X3, pieces
Aixtron MOCVD - III-V system aix200	Deposition > Chemical Vapor Deposition (CVD) > Metal-Organic (MO) CVD	Pre-Diffusion Clean	Flexible			0.00 - 5.00 μm	AlAs AlGaAs GaAs GaP GaPN III-V materials InAs InGaAs InGaAsN					300 °C - 800 °C		H₂ MO sources N₂ SiH₄	Pieces 2" 4"	(Si) , (SiO2) , (Al₂O₃) , (GaN) , (III-V) , (GaAs)	4"x1 wafer or 2"x1 wafer or 4 pieces
AJA Evaporator aja-evap	Deposition > Physical Vapor Deposition (PVD) > Evaporation		Flexible			0.00 - 300.00 nm	Ag Al Au Co Cr Cu Fe Ge Hf Ni Ni_xO_y Pd Pt SiO₂ Ti Titania								Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various)	4"x3 or 6"x1 wafers or pieces
AJA2 Evaporator aja2-evap	Deposition > Physical Vapor Deposition (PVD) > Evaporation		Flexible			0.00 - 300.00 nm	Ag Al Au Cr Cu Ni Pd Pt Ti								Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (Ge) , (Various)	4"x3 or 6"x1 wafers or pieces
AMAT Centurion Epitaxial System epi2	Doping Deposition > Chemical Vapor Deposition (CVD) > EPI (CVD) Annealing & Oxidation > Hydrogen (H2) Annealing Deposition > Chemical Vapor Deposition (CVD) > Low Pressure (LP) CVD Deposition > Chemical Vapor Deposition (CVD) > Plasma Enhanced (PE) CVD	Pre-Diffusion Clean	Clean			50.00 Å - 3.00 μm	Ge Si SiGe					600 °C - 1200 °C		AsH₃ B₃H₆ GeH₄ H₂ N₂ PH₃ SiH₄	4"		1
ASML PAS 5500/60 i-line Stepper asml	Photolithography > Exposure > Stepper		"All"					365 nm	5 inch						4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂)
CHA Solutions II Evaporator cha-evap	Deposition > Physical Vapor Deposition (PVD) > Evaporation		Flexible			0.00 - 300.00 nm	Ag Al Au Cr Cu Ni Pd Pt Ti								Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (Ge) , (Various)	4"x15 or 6"x3 wafers or pieces
Critical Point Dryer Tousimis Automegasamdri-936 cpd	Drying > CO2 Drying Wet Chemical Processing		Flexible										CO₂		Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)
DISCO Wafer Saw DISCO wafersaw	Machining > Wafer Saw		Flexible												Pieces 2" 3" 4" 6" 8"	(Si) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V)	1x4", 1x6" or 1x8" wafer, or pieces
EVG 101 Spray Coater evgspraycoat	Photolithography > Resist coat > Resist Spray Coat (manual)		"All"							Resists					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂)	1
Ex Fab Develop Wet Bench wbexfab_dev	Photolithography > Resist Develop > Resist Develop (manual) Wet Chemical Processing		Flexible								AZ 1:1 MF-26A developer				Pieces 2" 3" 4" 6" 8" 12" Cones Disks Other
Ex Fab Solvent Wet Bench wbexfab_solv	Patterning > Metal Lift-off Cleaning > Solvent Cleaning Wet Chemical Processing		Flexible										Solvents		Pieces 2" 3" 4" 6" 8" Other
Fiji 1 ALD fiji1	Deposition > Atomic Layer Deposition (ALD) > Plasma Enhanced (PE) ALD		Semiclean			1.00 Å - 50.00 nm	Metal oxides HfN Pt Ru SiO₂ Ta₂O₅ TaN TiN Various Dielectrics Alumina Hafnia Titania Zirconia					24 °C - 350 °C		Ar H₂ N₂ NH₃ O₂	Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2)
Fiji 2 ALD fiji2	Deposition > Atomic Layer Deposition (ALD) > Plasma Enhanced (PE) ALD		Flexible			1.00 Å - 50.00 nm	Metal oxides Ga₂O₃ HfN In₂O₃ Ni_xO_y Pt Ru Si3N4 SiO₂ SnO₂ SrO Ta₂O₅ TiN Various Dielectrics Alumina Hafnia ITO Moly Oxide Titania Zirconia					24 °C - 350 °C		Ar H₂ N₂ O₂	Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (Various) , (Various) , (LiNb) , (Various)
Fiji 3 ALD fiji3	Deposition > Atomic Layer Deposition (ALD) > Plasma Enhanced (PE) ALD		Flexible			1.00 Å - 50.00 nm	SiO₂ Various Dielectrics Alumina Hafnia Titania					24 °C - 350 °C		Ar H₂ N₂ NH₃ O₂	Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (III-V)
Finetech Lambda flipchipbonder	Bonding		Flexible									°C - 400 °C			Pieces 4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge)	1
First Nano carbon nanotube CVD furnace cvd-nanotube	Deposition > Chemical Vapor Deposition (CVD) > Carbon Nanotube CVD Growth		Flexible				CNT					800 °C - 1100 °C		Ar C₂H₅OH CH₄ H₂ O₂	Pieces 2" 3" 4"	(Si) , (SiO2)	1x4" wafer or multiple pieces
Flexus 2320 Stress Tester stresstest	Characterization > Film Stress Measurement		"All"												3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
Gasonics Aura Asher gasonics	Etching > Dry Etching > Downstream/Remote Plasma Etching Cleaning > Resist Removal > Dry Resist Removal > Downstream/Remote Plasma Resist Removal		Clean, Semiclean	Resist	PI									O₂	4"	(Si)	25