4 inch wafer

Short Name:

The following is a list of equipment where 4 inch round substrates are allowed.

Equipment name & NEMO ID	Training Required & Charges	Cleanliness	Location	Notes
Keyence Digital Microscope VHX-6000 keyence	Microscope Keyence Training	"All"	SNF Exfab Paul G Allen 104 Stinson
Nanospec 210XP nanospec2	Nanospec Training	"All"	SNF Exfab Paul G Allen 104 Stinson	Manual Film Thickness Measurement. Single or dual layer transparent films > 300 Ã
Heidelberg MLA 150 heidelberg	Heidelberg Training	"All"	SNF Exfab Paul G Allen 104 Stinson	Direct Write
Profilometer Alphastep 500 alphastep	Alphastep 500 Profilometer Training	Flexible	SNF Exfab Paul G Allen 104 Stinson	500Å to 300µm
SEM -Zeiss Merlin sem-merlin	SEM-Merlin Training	"All"	SNF Exfab Paul G Allen 104 Stinson
Profilometer AlphaStep D-300 alphastep2	AlphaStep2 Training	Flexible	SNF Exfab Paul G Allen 104 Stinson
Headway 3 Manual Resist Spinner headway3	Resist Coat (manual) Headway 3 Training	"All"	SNF Exfab Paul G Allen 104 Stinson
Ex Fab Develop Wet Bench wbexfab_dev	WbExfab_Dev Training	Flexible	SNF Exfab Paul G Allen 104 Stinson	Manual development of resist in beakers. SNF approved developers only. No solvents!
Ex Fab Solvent Wet Bench wbexfab_solv	WbExfab_Solv Training	Flexible	SNF Exfab Paul G Allen 104 Stinson
Finetech Lambda flipchipbonder	Flip Chip Bonder Training	Flexible	SNF Exfab Paul G Allen 104 Stinson
Fiji 1 ALD fiji1	ALD Fiji 1 and 2 Training	Semiclean	SNF Paul G Allen L107 Cleanroom
Wet Bench Decontamination wbdecon	Wet Bench Decontamination Training	Clean	SNF Paul G Allen L107 Cleanroom	KOH or wafersaw or post-cmp decontamination
SVG Develop Track 1 svgdev	SVG Resist Develop tracks 1 and 2 Training	"All"	SNF Paul G Allen L107 Cleanroom	Automatic development.
Heidelberg MLA 150 - 2 heidelberg2	Heidelberg Training	"All"	SNF Paul G Allen L107 Cleanroom	Direct Write
Tystar Bank 2 Tube 7 Nitride B2T7 Clean Nitride	Tystar LPCVD Tube Training	Clean	SNF Paul G Allen L107 Cleanroom
Oxford III-V etcher Ox-35	Oxford III-V etcher Training	Flexible	SNF Paul G Allen L107 Cleanroom	Metal etching or Metal hard masks are not allowed. 4" wafers; can be adopted to do 6" or 8" wafers; pieces need to be bonded to carrier wafers; Restrictions: III-V materials only.
Wet Bench Solvent Lithography lithosolv	Lithography Solvent Bench Training	Flexible	SNF Paul G Allen L107 Cleanroom	Manual solvent cleaning of substrates or masks. Teflon coated metal tweezers cleaning.
Laurell Manual Resist Spinner laurell-R	Laurell Manual Resist Spinner Training	"All"	SNF Paul G Allen L107 Cleanroom	SU-8, LOL, Ebeam resists allowed. No Acetone allowed.
Sensofar S-neox s-neox	Sensofar S-neox Training	"All"	SNF Paul G Allen L107 Cleanroom	non contact 3D optical profiling
Technics Asher technics	Technics Asher Training	Flexible	SNF Paul G Allen L107 Cleanroom

Pages

Equipment name & NEMO ID	Technique	Cleaning Required	Cleanliness	Primary Materials Etched	Other Materials Etched	Material Thickness Range	Materials Lab Supplied	Exposure Wavelength	Mask Size	Resist	Developer	Process Temperature Range	Chemicals	Gases	Substrate Size	Substrate Type	Maximum Load
Aixtron Black Magic graphene CVD furnace aixtron-graphene	Deposition > Chemical Vapor Deposition (CVD) > Graphene CVD Growth		Flexible				C					800 °C - 1100 °C		78% N₂, 21% O₂, ~1% Ar CH₄ H₂	Pieces 2" 3" 4"	(Si) , (Various)	1x4" wafer or Copper/Nickel foil
Aixtron MOCVD - III-N system aix-ccs	Deposition > Chemical Vapor Deposition (CVD) > Metal-Organic (MO) CVD		Clean (MOCVD)			0.00 - 5.00 μm	AlGaN AlN GaN III-N materials InAlN InGaAlN InGaN InN					400 °C - 1300 °C		H₂ MO sources N₂ NH₃ SiH₄	Pieces 2" 4"	(Si) , (Al₂O₃) , (SiC) , (GaN)	4"x1, 2"X3, pieces
Aixtron MOCVD - III-V system aix200	Deposition > Chemical Vapor Deposition (CVD) > Metal-Organic (MO) CVD	Pre-Diffusion Clean	Flexible			0.00 - 5.00 μm	AlAs AlGaAs GaAs GaP GaPN III-V materials InAs InGaAs InGaAsN					300 °C - 800 °C		H₂ MO sources N₂ SiH₄	Pieces 2" 4"	(Si) , (SiO2) , (Al₂O₃) , (GaN) , (III-V) , (GaAs)	4"x1 wafer or 2"x1 wafer or 4 pieces
AJA Evaporator aja-evap	Deposition > Physical Vapor Deposition (PVD) > Evaporation		Flexible			0.00 - 300.00 nm	Ag Al Au Co Cr Cu Fe Ge Hf Ni Ni_xO_y Pd Pt SiO₂ Ti Titania								Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various)	4"x3 or 6"x1 wafers or pieces
AJA2 Evaporator aja2-evap	Deposition > Physical Vapor Deposition (PVD) > Evaporation		Flexible			0.00 - 300.00 nm	Ag Al Au Cr Cu Ni Pd Pt Ti								Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (Ge) , (Various)	4"x3 or 6"x1 wafers or pieces
AMAT Centurion Epitaxial System epi2	Doping Deposition > Chemical Vapor Deposition (CVD) > EPI (CVD) Annealing & Oxidation > Hydrogen (H2) Annealing Deposition > Chemical Vapor Deposition (CVD) > Low Pressure (LP) CVD Deposition > Chemical Vapor Deposition (CVD) > Plasma Enhanced (PE) CVD	Pre-Diffusion Clean	Clean			50.00 Å - 3.00 μm	Ge Si SiGe					600 °C - 1200 °C		AsH₃ B₃H₆ GeH₄ H₂ N₂ PH₃ SiH₄	4"		1
ASML PAS 5500/60 i-line Stepper asml	Photolithography > Exposure > Stepper		"All"					365 nm	5 inch						4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂)
CHA Solutions II Evaporator cha-evap	Deposition > Physical Vapor Deposition (PVD) > Evaporation		Flexible			0.00 - 300.00 nm	Ag Al Au Cr Cu Ni Pd Pt Ti								Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (Ge) , (Various)	4"x15 or 6"x3 wafers or pieces
Critical Point Dryer Tousimis Automegasamdri-936 cpd	Drying > CO2 Drying Wet Chemical Processing		Flexible										CO₂		Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)
DISCO Wafer Saw DISCO wafersaw	Machining > Wafer Saw		Flexible												Pieces 2" 3" 4" 6" 8"	(Si) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V)	1x4", 1x6" or 1x8" wafer, or pieces
EVG 101 Spray Coater evgspraycoat	Photolithography > Resist coat > Resist Spray Coat (manual)		"All"							Resists					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂)	1
Ex Fab Develop Wet Bench wbexfab_dev	Photolithography > Resist Develop > Resist Develop (manual) Wet Chemical Processing		Flexible								AZ 1:1 MF-26A developer				Pieces 2" 3" 4" 6" 8" 12" Cones Disks Other
Ex Fab Solvent Wet Bench wbexfab_solv	Patterning > Metal Lift-off Cleaning > Solvent Cleaning Wet Chemical Processing		Flexible										Solvents		Pieces 2" 3" 4" 6" 8" Other
Fiji 1 ALD fiji1	Deposition > Atomic Layer Deposition (ALD) > Plasma Enhanced (PE) ALD		Semiclean			1.00 Å - 50.00 nm	Metal oxides HfN Pt Ru SiO₂ Ta₂O₅ TaN TiN Various Dielectrics Alumina Hafnia Titania Zirconia					24 °C - 350 °C		Ar H₂ N₂ NH₃ O₂	Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2)
Fiji 2 ALD fiji2	Deposition > Atomic Layer Deposition (ALD) > Plasma Enhanced (PE) ALD		Flexible			1.00 Å - 50.00 nm	Metal oxides Ga₂O₃ HfN In₂O₃ Ni_xO_y Pt Ru Si3N4 SiO₂ SnO₂ SrO Ta₂O₅ TiN Various Dielectrics Alumina Hafnia ITO Moly Oxide Titania Zirconia					24 °C - 350 °C		Ar H₂ N₂ O₂	Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (Various) , (Various) , (LiNb) , (Various)
Fiji 3 ALD fiji3	Deposition > Atomic Layer Deposition (ALD) > Plasma Enhanced (PE) ALD		Flexible			1.00 Å - 50.00 nm	SiO₂ Various Dielectrics Alumina Hafnia Titania					24 °C - 350 °C		Ar H₂ N₂ NH₃ O₂	Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (III-V)
Finetech Lambda flipchipbonder	Bonding		Flexible									°C - 400 °C			Pieces 4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge)	1
First Nano carbon nanotube CVD furnace cvd-nanotube	Deposition > Chemical Vapor Deposition (CVD) > Carbon Nanotube CVD Growth		Flexible				CNT					800 °C - 1100 °C		Ar C₂H₅OH CH₄ H₂ O₂	Pieces 2" 3" 4"	(Si) , (SiO2)	1x4" wafer or multiple pieces
Flexus 2320 Stress Tester stresstest	Characterization > Film Stress Measurement		"All"												3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
Gasonics Aura Asher gasonics	Etching > Dry Etching > Downstream/Remote Plasma Etching Cleaning > Resist Removal > Dry Resist Removal > Downstream/Remote Plasma Resist Removal		Clean, Semiclean	Resist	PI									O₂	4"	(Si)	25