6 inch wafer

Short Name:

Equipment name & NEMO ID	Training Required & Charges	Cleanliness	Location	Notes
Nanospec 210XP nanospec2	Nanospec Training	All	SNF Exfab Paul G Allen 104 Stinson	Manual Film Thickness Measurement. Single or dual layer transparent films > 300 Ã
Heidelberg MLA 150 heidelberg	Heidelberg Training	All	SNF Exfab Paul G Allen 104 Stinson	Direct Write
Profilometer Alphastep 500 alphastep	Alphastep 500 Profilometer Training	Flexible	SNF Exfab Paul G Allen 104 Stinson	500Å to 300µm
SEM -Zeiss Merlin sem-merlin	SEM-Merlin Training	All	SNF Exfab Paul G Allen 104 Stinson
Profilometer AlphaStep D-300 alphastep2	AlphaStep2 Training	Flexible	SNF Exfab Paul G Allen 104 Stinson
Keyence Digital Microscope VHX-6000 keyence	Microscope Keyence Training	All	SNF Exfab Paul G Allen 104 Stinson
Ex Fab Develop Wet Bench wbexfab_dev	WbExfab_Dev Training	Flexible	SNF Exfab Paul G Allen 104 Stinson	Manual development of resist in beakers. SNF approved developers only. No solvents!
Ex Fab Solvent Wet Bench wbexfab_solv	WbExfab_Solv Training	Flexible	SNF Exfab Paul G Allen 104 Stinson
Fiji 1 ALD fiji1	ALD Fiji 1 and 2 Training	Semiclean	SNF Cleanroom Paul G Allen L107
Wet Bench CMOS Metal wbclean3	Wet Bench CMOS Metal (wbclean3) Training	Semiclean	SNF Cleanroom Paul G Allen L107	Al, Ti, or W wet etching or oxide etching
Plasma Therm Versaline LL ICP Deep Silicon Etcher PT-DSE	Plasma Therm Versaline LL ICP Deep Silicon Etcher Training	Flexible	SNF Cleanroom Paul G Allen L107	Single wafer; Bosch process for Si etching; Default 4" config; Can be converted to 6" config; pieces need to be attached to carrier wafer; need a support wafer for through wafer etching, can be used for Isotropic Si Etching
Technics Asher technics	Technics Asher Training	Flexible	SNF Cleanroom Paul G Allen L107
Wet Bench Miscellaneous wbmiscres	Wet Bench Miscellaneous Photoresist Training	Flexible	SNF Cleanroom Paul G Allen L107	Manual development of resist in beakers and Headway (manual resist spinner). SNF approved developers (acid or base). No solvents!
Plasma Therm Versaline LL ICP Dielectric Etcher PT-Ox	Plasma Therm Versaline LL ICP Dielectric Etcher Training	Flexible	SNF Cleanroom Paul G Allen L107	Single wafer; Default 4" config; Can be converted to 6" config; pieces need to be attached to carrier wafer; Restrictions: Can not etch metals or metal oxides with no volatile by-products (shorting & arcing issues)
Sensofar S-neox s-neox	Sensofar S-neox Training	All	SNF Cleanroom Paul G Allen L107	non contact 3D optical profiling
Samco PC300 Plasma Etch System samco	Samco Training	Flexible	SNF Cleanroom Paul G Allen L107
Wet Bench Clean_res-hf wbclean_res-hf	Wet Bench Clean Piranha/HF/Phosphoric Training	Clean	SNF Cleanroom Paul G Allen L107	Resist as mask allowed
Laurell Manual Resist Spinner laurell-R	Laurell Manual Resist Spinner Training	All	SNF Cleanroom Paul G Allen L107	SU-8, LOL, Ebeam resists allowed. No Acetone allowed.
Tencor P2 Profilometer p2	Tencor P2 Profilometer Training	Clean, Semiclean	SNF Cleanroom Paul G Allen L107	Step height measurement range 500 Å to 80 µm
Lesker2 Sputter lesker2-sputter	Sputter Lesker 1&2 Training	Semiclean	SNF Cleanroom Paul G Allen L107	reactive O2/N2 sputtering, substrate bias, substrate heating, co-sputter

Pages

Equipment name & NEMO ID	Technique	Cleanliness	Material Thickness Range	Materials Lab Supplied	Exposure Wavelength	Mask Size	Max Exposure Area	Resist	Developer	Process Temperature Range	Chemicals	Gases	Substrate Size	Substrate Type	Maximum Load
AJA Evaporator aja-evap	Deposition > Physical Vapor Deposition (PVD) > Evaporation	Flexible	0.00 - 300.00 nm	Ag Al Au Co Cr Cu Fe Ge Hf Ni Ni_xO_y Pd Pt SiO₂ Ti Titania									Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various)	4"x3 or 6"x1 wafers or pieces
AJA2 Evaporator aja2-evap	Deposition > Physical Vapor Deposition (PVD) > Evaporation	Semiclean	0.00 - 300.00 nm	Ag Al Co Cr Ge Hf Nb Pd Pt Si Ta Ti V W Zr Moly									Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (Ge) , (Various)	4"x3 or 6"x1 wafers or pieces
Critical Point Dryer Tousimis Automegasamdri-915B cpd	Drying > CO2 Drying	Flexible									CO₂		Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)
DISCO Wafer Saw DISCO wafersaw	Machining > Wafer Saw	Flexible											Pieces 2" 3" 4" 6" 8"	(Si) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	1x4", 1x6" or 1x8" wafer, or pieces
EVG 101 Spray Coater evgspraycoat	Photolithography > Resist coat > Resist Spray Coat (manual)	All						Resists					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂)	1
EVG Contact Aligner evalign	Photolithography > Exposure > Contact Aligner	All			350 - 450 nm	5 inch, 7 inch	5 inch mask = 4 inch, 7 inch mask = 6 inch						Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂)	one piece or wafer
Ex Fab Develop Wet Bench wbexfab_dev	Photolithography > Resist Develop > Resist Develop (manual)	Flexible							AZ 1:1 MF-26A developer				Pieces 2" 3" 4" 6" 8" 12" Other
Ex Fab Solvent Wet Bench wbexfab_solv	Patterning > Metal Lift-off Cleaning > Solvent Cleaning	Flexible									Solvents		Pieces 2" 3" 4" 6" 8" Other
Fiji 1 ALD fiji1	Deposition > Atomic Layer Deposition (ALD) > Plasma Enhanced (PE) ALD	Semiclean	1.00 Å - 50.00 nm	Metal oxides HfN Pt Ru SiO₂ Ta₂O₅ TaN TiN Various Dielectrics Alumina Hafnia Titania Zirconia						24 °C - 350 °C		Ar H₂ N₂ NH₃ O₂	Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2)
Fiji 2 ALD fiji2	Deposition > Atomic Layer Deposition (ALD) > Plasma Enhanced (PE) ALD	Flexible	1.00 Å - 50.00 nm	Metal oxides Ga₂O₃ HfN In₂O₃ Ni_xO_y Pt Ru Si3N4 SiO₂ SnO₂ SrO Ta₂O₅ TiN Various Dielectrics Alumina Hafnia ITO Moly Oxide Titania Zirconia						24 °C - 350 °C		Ar H₂ N₂ O₂	Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (Various) , (Various) , (LiNb) , (Various)
Fiji 3 ALD fiji3	Deposition > Atomic Layer Deposition (ALD) > Plasma Enhanced (PE) ALD	Flexible	1.00 Å - 50.00 nm	SiO₂ Various Dielectrics Alumina Hafnia Titania						24 °C - 350 °C		Ar H₂ N₂ NH₃ O₂	Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (III-V)
Flexus 2320 Stress Tester stresstest	Characterization > Film Stress Measurement	All											3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
Headway Manual Resist Spinner headway2	Photolithography > Resist coat > Resist Coat (manual)	All						AZ5214IR Shipley 3612 resist SPR 955 CM-.7 resist SPR220-3 resist SPR220-7 (C₅O₂H₈)_n					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	one piece or wafer
Heidelberg MLA 150 heidelberg	Photolithography > Exposure > Direct Write	All			405 nm								Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various) , (LiNb)	1
Heidelberg MLA 150 - 2 heidelberg2	Photolithography > Exposure > Direct Write	All			375 nm								Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various) , (LiNb)	1
HMDS Vapor Prime Oven, YES yes	Photolithography > Wafer preparation before resist > Singe Photolithography > Wafer preparation before resist > Wafer Prime (HMDS)	All								150 ºC	[(CH₃)₃Si]₂NH		Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)
Intlvac Evaporator Intlvac_evap	Deposition > Physical Vapor Deposition (PVD) > Evaporation	Clean, Semiclean	0.00 - 0.50 μm	Al Co Cr Ge Hf Nb Ni Pd Si Ta Ti V W Zr Moly									Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2)	12 4 inch wafers, 2 6 inch wafers
Karl Suss MA-6 Contact Aligner karlsuss	Photolithography > Exposure > Contact Aligner	All			365 nm	4 inch, 5 inch, 7 inch	5 inch mask = 4 inch, 7 inch mask = 6 inch, 4 inch mask = 3 inch						Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs) , (Various)
Karl Suss MA-6 Contact Aligner karlsuss2	Photolithography > Exposure > Contact Aligner	All			365 nm or 405 nm	4 inch, 5 inch, 7 inch	5 inch mask = 4 inch, 7 inch mask = 6 inch, 4 inch mask = 3 inch						Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs) , (Various)
Keyence Digital Microscope VHX-6000 keyence	Characterization > Surface Analysis > Microscopy	All											Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)