4 inch wafer

Short Name:

The following is a list of equipment where 4 inch round substrates are allowed.

Equipment name & NEMO ID	Training Required & Charges	Cleanliness	Location	Notes
Fiji 3 ALD fiji3	ALD Fiji 3 Training	Flexible	SNF Paul G Allen L107 Cleanroom	Restricted to non-conductive films only
Wet Bench Miscellaneous wbmiscres	Wet Bench Miscellaneous Photoresist Training	Flexible	SNF Paul G Allen L107 Cleanroom	Manual development of resist in beakers and Headway (manual resist spinner). SNF approved developers (acid or base). No solvents!
Matrix Plasma Resist Strip matrix	Matrix Plasma Resist Strip Training	Flexible	SNF Paul G Allen L107 Cleanroom	Single wafer tool with auto loading from a cassette. Pieces need a pocket carrier wafer for transport. Chuck temperature controls wafer heating.
Karl Suss MA-6 Contact Aligner karlsuss2	Contact Aligner Karl Suss MA-6 Training	All	SNF Paul G Allen L107 Cleanroom	1:1 Contact Aligner. Backside align.
SVG Develop Track 2 svgdev2	SVG Resist Develop tracks 1 and 2 Training	All	SNF Paul G Allen L107 Cleanroom	Automatic development.
Tystar Bank 2 Tube 5 B2T5 Clean Anneal	Tystar Atmospheric Tube Training	Clean	SNF Paul G Allen L107 Cleanroom
MVD mvd	MVD Training	Flexible	SNF Paul G Allen L107 Cleanroom	Reactor located inside glovebox
Wet Bench Resist Strip wbresstrip-1	Wet Bench Resist Strip	Clean (Ge), Semiclean, Flexible	SNF Paul G Allen L107 Cleanroom	Wet Resist Removal: SRS-100 or PRS1000
Xactix Xenon Difluoride Etcher xactix	Xactix Xenon Difluoride Etcher Training	All	SNF Paul G Allen L107 Cleanroom	Isotropic Si etching; can be used for backside Si removal on small pieces
Karl Suss MA-6 Contact Aligner karlsuss	Contact Aligner Karl Suss MA-6 Training	All	SNF Paul G Allen L107 Cleanroom	1:1 Contact Aligner. Backside align, including IR.
Nanospec 3 nanospec3	Nanospec 3 Training	All	SNF Paul G Allen L107 Cleanroom
Tystar Bank 2 Tube 6 B2T6 Clean Oxide	Tystar Atmospheric Tube Training	Clean	SNF Paul G Allen L107 Cleanroom
Savannah ALD savannah	ALD Savannah Training	Flexible	SNF Paul G Allen L107 Cleanroom
Wet Bench Clean_res-hf wbclean_res-hf	Wet Bench Clean Piranha/HF/Phosphoric Training	Clean	SNF Paul G Allen L107 Cleanroom	Resist as mask allowed
Plasma Therm Versaline LL ICP Deep Silicon Etcher PT-DSE	Plasma Therm Versaline LL ICP Deep Silicon Etcher Training	Flexible	SNF Paul G Allen L107 Cleanroom	Single wafer; Bosch process for Si etching; Default 4" config; Can be converted to 6" config; pieces need to be attached to carrier wafer; need a support wafer for through wafer etching, can be used for Isotropic Si Etching
ASML PAS 5500/60 i-line Stepper asml	Stepper ASML PAS 5500/60 i-line Training	All	SNF Paul G Allen L107 Cleanroom	5:1 reducing stepper
Tystar Bank 3 Tube 9 B3T9 Clean Oxide	Tystar Atmospheric Tube Training	Clean	SNF Paul G Allen L107 Cleanroom
Woollam woollam	Woollam Training	All	SNF Paul G Allen L107 Cleanroom
Wet Bench Flexcorr 4 wbflexcorr-4	Wet Bench Flexcorr 1and2 and 3and4 Training	Flexible	SNF Paul G Allen L107 Cleanroom	Manual wet etching of non-standard materials using acids or bases. Hot plate, HF bath, and controlled temperature bath available. GaAs not allowed.
Oxford Dielectric Etcher oxford-rie	Oxford Dielectric Etcher Training	Flexible	SNF Paul G Allen L107 Cleanroom	4" wafers; can be adopted to do 6" or 8" wafers; pieces need to be bonded to carrier wafers

Pages

Equipment name & NEMO ID	Technique	Cleaning Required	Cleanliness	Primary Materials Etched	Other Materials Etched	Material Thickness Range	Materials Lab Supplied	Resist	Developer	Process Temperature Range	Gases	Sample Size Limits	Substrate Size	Substrate Type	Maximum Load
RTA AllWin 610 aw610_r	Annealing & Oxidation > Rapid Thermal Annealing		Flexible							21 °C - 1150 °C	4% H₂ in N₂ Ar N₂ NH₃ O₂		Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2)
Samco PC300 Plasma Etch System samco	Cleaning > Resist Removal > Dry Resist Removal > Downstream/Remote Plasma Resist Removal Etching > Dry Etching > Capacitively Coupled Plasma Etching (CCP) > Plasma Mode Etching Etching > Dry Etching > Capacitively Coupled Plasma Etching (CCP) > Reactive Ion Etching (RIE)		Flexible	Resist	dimethylpolysiloxane Si Si3N4 SiO₂ SiON Various polymers PI					20 ºC	CF₄ O₂ SF₆		Pieces 2" 3" 4" 6" 8" Other	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various) , (LiNb) , (Various)	Four 4" wafers or two 6" wafers and one 8" wafer
Savannah ALD savannah	Deposition > Atomic Layer Deposition (ALD) > Thermal ALD		Flexible			1.00 Å - 50.00 nm	Metal oxides Ga₂O₃ SnO₂ Various Dielectrics ZnO₃ Alumina AZO Hafnia Titania Zirconia			24 °C - 250 °C	N₂		Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (Various) , (Various) , (LiNb) , (Various)
SEM -Zeiss Merlin sem-merlin	Characterization > Surface Analysis > Microscopy > Scanning Electron Microscopy (SEM)		All			0.00 mm - 35.00 mm						6 in wafer	Pieces 2" 3" 4" 6" Disks	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (LiNb)	one
Sensofar S-neox s-neox	Characterization > Surface Analysis > Profilometer > Interferometry Characterization > Surface Analysis > Profilometer > Optical Profilometer		All										Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
Sinton Lifetime Tester sinton-lifetime-tester	Characterization > Minority Carrier Characterization		Flexible										Pieces 2" 3" 4" 6"
SPTS uetch vapor etch uetch	Etching > Vapor Etching		All	SiO₂							C₂H₅OH HF vapor		Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	1
SVG Develop Track 1 svgdev	Photolithography > Resist Develop > Resist Develop (automatic)		All						MF-26A developer				4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	25 4 inch wafers
SVG Develop Track 2 svgdev2	Photolithography > Resist Develop > Resist Develop (automatic)		All						MF-26A developer				4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	25 4 inch wafers
SVG Resist Coat Track 1 svgcoat	Photolithography > Resist coat > Resist Coat (automatic)		All					Shipley 3612 resist SPR220-3 resist SPR220-7					4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	25 4 inch wafers
SVG Resist Coat Track 2 svgcoat2	Photolithography > Resist coat > Resist Coat (automatic)		All					AZ5214IR Shipley 3612 resist SPR 955 CM-.7 resist					4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	25 4 inch wafers
Technics Asher technics	Etching > Dry Etching Cleaning > Resist Removal > Dry Resist Removal		Flexible	Resist	dimethylpolysiloxane poly(p-xylylene) PI						O₂		Pieces 4" 6" 8"	(Si) , (SiO2) , (SiO₂)	Four 4" wafers to pieces, one 6" or 8" wafer
Tencor P2 Profilometer p2	Characterization > Surface Analysis > Profilometer > Step Profile		Clean, Semiclean										Pieces 2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)	1
Tystar Bank 1 Tube 1 Anneal B1T1 Flexible Oxide	Annealing & Oxidation > Oxide Growth (furnace)		Flexible			25.00 Å - 2.00 μm				400 °C - 1100 °C	4% H₂ in N₂ N₂ O₂		4" 6"	(Si) , (SiGe) , (SiO2)	100
Tystar Bank 1 Tube 2 B1T2 Flexible Oxide	Annealing & Oxidation > Annealing (furnace) Annealing & Oxidation > Oxide Growth (furnace)		Flexible			25.00 Å - 2.00 μm	SiO₂			400 °C - 1100 °C	4% H₂ in N₂ N₂ O₂		4" 6"	(Si) , (SiGe) , (SiO2)	100
Tystar Bank 1 Tube 3 Poly B1T3 Flexible Poly	Deposition > Chemical Vapor Deposition (CVD) > Low Pressure (LP) CVD		Flexible			25.00 Å - 2.00 μm	Ge Si SiGe Poly Silicon			420 °C - 630 °C	B₂H₆ GeH₄ N₂ PH₃ SiH₄		4" 6"	(Si) , (SiGe) , (SiO2) , (Ge) , (SiC) , (III-V)	100
Tystar Bank 1 Tube 4 LTO B1T4 Flexible LTO	Deposition > Chemical Vapor Deposition (CVD) > Low Pressure (LP) CVD		Flexible			25.00 Å - 2.00 μm	SiO₂			300 °C - 500 °C	N₂ O₂ PH₃ SiH₄		4" 6"	(Si) , (SiGe) , (SiO2) , (Ge) , (SiC) , (III-V)	100
Tystar Bank 2 Tube 5 B2T5 Clean Anneal	Annealing & Oxidation > Oxide Growth (furnace)	Pre-Diffusion Clean	Clean			25.00 Å - 2.00 μm				400 °C - 1100 °C	4% H₂ in N₂ N₂ O₂		4" 6"	(Si) , (SiGe) , (SiO2)	100
Tystar Bank 2 Tube 6 B2T6 Clean Oxide	Annealing & Oxidation > Oxide Growth (furnace)	Pre-Diffusion Clean	Clean			25.00 Å - 2.00 μm	SiO₂			400 °C - 1100 °C	4% H₂ in N₂ N₂ O₂		4" 6"	(Si) , (SiGe) , (SiO2)	100
Tystar Bank 2 Tube 7 Nitride B2T7 Clean Nitride	Deposition > Chemical Vapor Deposition (CVD) > Low Pressure (LP) CVD	Pre-Diffusion Clean	Clean			25.00 Å - 2.00 μm	Si3N4 SiON			420 °C - 800 °C	NH₃ DCS		4" 6"	(Si) , (SiGe) , (SiO2)	50