Training Videos
Click on one of the links below to view a training video, which are also available on the nano at stanford youtube channel.
The first four videos below are required viewing before you can enter the SNF cleanroom (unless you are on an authorized tour).
- Building Safety Tour (9:42)
- Cleanroom Safety Tour (12:49)
- SNF Safety Training (22:27)
- SNF Cleanroom Gowning (2:00)
SNF Stanford Non-standard Substrates, 7 minutes
Tweezers Cleaning (Teflon Coated Metal tweezers), 9 minutes
Tweezers (plastic tweezers) Cleaning, 9 minutes
Prof. Saraswat, Cleanliness Contamination and Chemical Handling, 51 minutes
Introduction to Fabrication & Processing
- The Silicon Run Series -- SNF contributes to this series of educational videos from Silicon Run Productions.
- Nanotechnology and Carbon Nanotubes -- From the Stanford Nanoelectronics Group (many of whom used to be labmembers!)
- How it's Made: CCD Semiconductor
| Title | Description | |
|---|---|---|
| 1 | AlphaStep Profilometer Video Tutorial |
NOTE:This was made for the D-500 model AlphaStep, but I have yet to see anything that does not also apply... |
| 2 | Bonding pieces of Si and LiNb with tweezers Video |
Our E241 students demonstrate their technique for bonding pieces of Si and LiNb with tweezers. |
| 3 | Dry Etching at SNF (Part 1 of 4) - Introduction | Dr. James McVittie introduces Dry Etching (Part 1 of 4) from Stanford Nanofabrication Facility (SNF). This video is part of... |
| 4 | Dry Etching at SNF (Part 2 of 4) - Basics of Plasmas & Types of Tools | Dr. James McVittie goes into further detail on Dry Etching: Basics of Plasmas & Types of Dry Etching Tools (Part... |
| 5 | Dry Etching at SNF (Part 3 of 4) - Dry Etching Mechanisms | Dr. James McVittie goes into further detail on Dry Etching: Dry Etching Mechanisms (Part 3 of 4) from Stanford Nanofabrication... |
| 6 | Dry Etching at SNF (Part 4 of 4) - Choosing a Dry Etching Process & Tool |
Dr. James McVittie goes into further detail on Dry Etching: Choosing a Dry Etching Process & Tool (Part 4 of... |
| 7 | Fiji1,2,and3 Loading and Unloading Videos |
Here is a more realistic video of a Fiji load (note that the plate first hit the heater, then was... |
| 8 | Fiji1,2,and3 Loading and Unloading Videos |
This is a video taken of a successful load of the sample into the SNF Fiji. The chamber and load... |
| 9 | Fiji1,2,and3 Loading and Unloading Videos |
This animation shows the "theory" of how to load and unload the Fijis (1,2, and 3) at SNF. |
| 10 | Fiji1,2,and3 Loading and Unloading Videos |
And here is a video of the most common loading problem (when you go to insert the pins into the... |
| 11 | Heidelberg Training Videos |
Training video playlist for Heidelberg |
| 12 | Jasco UV-Vis-NIR Training Video |
Please watch this training video for the SNF ExFab Jasco-UV-Vis-NIR. |
| 13 | Lampoly Video Etcher Setup |
Video showing how to set up an etch on the Lampoly. |
| 14 | Lampoly Video Recipe Setup |
Video describing Lampoly recipe set up: creation and editing. |
| 15 | Lasercutter Training Video | |
| 16 | LEI1500 Training Video | |
| 17 | Nanoscribe Trailer |
If the video does not display on the webpage, please us the following link Enjoy!!! |
| 18 | Nanoscribe video - Running the Nanoscribe |
The video is located at if the automated video display on the website does not work |
| 19 | Nanoscribe Video - Working with the Objectives |
The video is located at if the automatic display on the website does not work ... |
| 20 | Nanospec 210XP Training Video |
Pages
Last modified: 11 Aug 2023
