Skip to content Skip to navigation

Training Videos

Click on one of the links below to view a training video, which are also available on the nano at stanford youtube channel.

The first four videos below are required viewing before you can enter the SNF cleanroom (unless you are on an authorized tour).

SNF Wafer Handling, 7 minutes

SNF Stanford Non-standard Substrates, 7 minutes

 

Tweezers Cleaning (Teflon Coated Metal tweezers), 9 minutes

Tweezers (plastic tweezers) Cleaning, 9 minutes

 

Prof. Saraswat, Cleanliness Contamination and Chemical Handling, 51 minutes

Introduction to Fabrication & Processing

All Videos from Equipment & Documentation Pages

Title Descriptionsort descending
1 Voltera: Getting Started with Custom Inks
2 SNF ExFab PE-50 Training Video
3 SNF ExFab PE-50 Gas Adjustment
4 Lasercutter Training Video
5 Nanospec 210XP Training Video
6 SVG Resist Coat Training Video
7 Wbclean Training Video
8 YES Prime Oven Training Video
9 SVG Resist Develop Training Video
10 Wet Bench Clean Piranha: Remove resist using piranha Training Video
11 Wet Benches Solvent Fire Suppression Video
12 LEI1500 Training Video

https://youtu.be/3J-wLJh0VCo

13 SNF ExFab PE-50 Plasma Power Controller

Brief video of how to adjust the plasma power on the PE-50 (this makes more sense when you also read...

14 Fiji1,2,and3 Loading and Unloading Videos

And here is a video of the most common loading problem (when you go to insert the pins into the...

15 Dry Etching at SNF (Part 4 of 4) - Choosing a Dry Etching Process & Tool

Dr. James McVittie goes into further detail on Dry Etching: Choosing a Dry Etching Process & Tool (Part 4 of...

16 Fiji1,2,and3 Loading and Unloading Videos

Here is a more realistic video of a Fiji load (note that the plate first hit the heater, then was...

17 Samco Training Video

If the video does not display on the webpage, please us the following link:

https://www.youtube.com/watch?v=1g0yqbAP15w

18 Nanoscribe Trailer

If the video does not display on the webpage, please us the following link

https://youtu.be/bdCJRPuuwA4

Enjoy!!!

19 AlphaStep Profilometer Video Tutorial

NOTE:This was made for the D-500 model AlphaStep, but I have yet to see anything that does not also apply...

20 Bonding pieces of Si and LiNb with tweezers Video

Our E241 students demonstrate their technique for bonding pieces of Si and LiNb with tweezers.

Pages

Last modified: 11 Aug 2023