2 inch wafer

Short Name:

2"

The following is a list of equipment where 2 inch round substrates are allowed.

Equipment Tables

Equipment name & NEMO ID	Training Required & Charges	Cleanliness	Location	Notes
Profilometer Alphastep 500 alphastep	Alphastep 500 Profilometer Training	Flexible	SNF Exfab Paul G Allen 104 Stinson	500Å to 300µm
SEM -Zeiss Merlin sem-merlin	SEM-Merlin Training	"All"	SNF Exfab Paul G Allen 104 Stinson
Profilometer AlphaStep D-300 alphastep2	AlphaStep2 Training	Flexible	SNF Exfab Paul G Allen 104 Stinson
Keyence Digital Microscope VHX-6000 keyence	Microscope Keyence Training	"All"	SNF Exfab Paul G Allen 104 Stinson
Heidelberg MLA 150 heidelberg	Heidelberg Training	"All"	SNF Exfab Paul G Allen 104 Stinson	Direct Write
Headway 3 Manual Resist Spinner headway3	Resist Coat (manual) Headway 3 Training	"All"	SNF Exfab Paul G Allen 104 Stinson
Ex Fab Develop Wet Bench wbexfab_dev	WbExfab_Dev Training	Flexible	SNF Exfab Paul G Allen 104 Stinson	Manual development of resist in beakers. SNF approved developers only. No solvents!
Ex Fab Solvent Wet Bench wbexfab_solv	WbExfab_Solv Training	Flexible	SNF Exfab Paul G Allen 104 Stinson
Nanospec 210XP nanospec2	Nanospec Training	"All"	SNF Exfab Paul G Allen 104 Stinson	Manual Film Thickness Measurement. Single or dual layer transparent films > 300 Ã
Savannah ALD savannah	ALD Savannah Training	Flexible	SNF Paul G Allen L107 Cleanroom
Critical Point Dryer Tousimis Automegasamdri-936 cpd	Critical Point Dryer Training	Flexible	SNF Paul G Allen L107 Cleanroom	CO2 drying after release of micromachined devices
Sensofar S-neox s-neox	Sensofar S-neox Training	"All"	SNF Paul G Allen L107 Cleanroom	non contact 3D optical profiling
AJA2 Evaporator aja2-evap	Evaporator AJA2 Training	Flexible	SNF Paul G Allen L107 Cleanroom	For more than 300nm deposition, please contact Gabe Catalano <gcatalano@stanford.edu> in advance
Woollam woollam	Woollam Training	"All"	SNF Paul G Allen L107 Cleanroom
MRC Reactive Ion Etcher mrc	MRC Reactive Ion Etcher Training	Flexible	SNF Paul G Allen L107 Cleanroom	Typically used for sputter etching; Single wafer, direct load system; wafers/ pieces can be directly placed on electrode
Xactix Xenon Difluoride Etcher xactix	Xactix Xenon Difluoride Etcher Training	"All"	SNF Paul G Allen L107 Cleanroom	Isotropic Si etching; can be used for backside Si removal on small pieces
Prometrix Resistivity Mapping System prometrix	Prometrix Training	"All"	SNF Paul G Allen L107 Cleanroom	3 Probe Heads for different cleanliness groups.
Headway Manual Resist Spinner headway2	Resist Coat (manual) Headway Manual Training	"All"	SNF Paul G Allen L107 Cleanroom	Adjustable spin speeds, spin time. SNF-acceptable resists or polymers. Ebeam resists
Laurell Manual Resist Spinner laurell-R	Laurell Manual Resist Spinner Training	"All"	SNF Paul G Allen L107 Cleanroom	SU-8, LOL, Ebeam resists allowed. No Acetone allowed.
CHA Solutions II Evaporator cha-evap	Evaporator CHA Training	Flexible	SNF Paul G Allen L107 Cleanroom	For more than 300nm deposition, please contact Neel Mehta <nmehta26@stanford.edu> in advance

Pages