4 inch wafer

Short Name:

4"

The following is a list of equipment where 4 inch round substrates are allowed.

Equipment Tables

Equipment name & NEMO ID	Training Required & Charges	Cleanliness	Location	Notes
Finetech Lambda flipchipbonder	Flip Chip Bonder Training	Flexible	SNF Exfab Paul G Allen 104 Stinson
First Nano carbon nanotube CVD furnace cvd-nanotube	cvd-nanotube training	Flexible	SNF Exfab Paul G Allen L119 Año Nuevo	Aligned single-walled carbon nanotube growth with ST-cut quartz substrates (available from SNF stockroom);1-15 single-walled carbon nanotubes per micron density
Gasonics Aura Asher gasonics	Resist Removal Dry Gasonics Training	Clean, Semiclean	SNF Paul G Allen L107 Cleanroom	Single wafer tool with auto loading from a cassette. Pieces need a pocket carrier wafer for transport. Wafers heated by lamps.
Headway Manual Resist Spinner headway2	Resist Coat (manual) Headway Manual Training	"All"	SNF Paul G Allen L107 Cleanroom	Adjustable spin speeds, spin time. SNF-acceptable resists or polymers. Ebeam resists
Woollam woollam	Woollam Training	"All"	SNF Paul G Allen L107 Cleanroom
Karl Suss MA-6 Contact Aligner karlsuss2	Contact Aligner Karl Suss MA-6 Training	"All"	SNF Paul G Allen L107 Cleanroom	1:1 Contact Aligner. Backside align.
Karl Suss MA-6 Contact Aligner karlsuss	Contact Aligner Karl Suss MA-6 Training	"All"	SNF Paul G Allen L107 Cleanroom	1:1 Contact Aligner. Backside align, including IR.
Lam Research TCP 9400 Poly Etcher lampoly	Lam Research TCP 9400 Poly Etcher Training	Clean, Semiclean	SNF Paul G Allen L107 Cleanroom	Single wafer etch with auto-loading from a cassette. Equipment originally used for gate etching with high selectivity to thin gate oxides.
Laurell Manual Resist Spinner laurell-R	Laurell Manual Resist Spinner Training	"All"	SNF Paul G Allen L107 Cleanroom	SU-8, LOL, Ebeam resists allowed. No Acetone allowed.
Wet Bench Solvent Lithography lithosolv	Lithography Solvent Bench Training	Flexible	SNF Paul G Allen L107 Cleanroom	Manual solvent cleaning of substrates or masks. Teflon coated metal tweezers cleaning.
Matrix Plasma Resist Strip matrix	Matrix Plasma Resist Strip Training	Flexible	SNF Paul G Allen L107 Cleanroom	Single wafer tool with auto loading from a cassette. Pieces need a pocket carrier wafer for transport. Chuck temperature controls wafer heating.
micromanipulator6000 IV-CV probe station micromanipulator6000	micromanipulator6000 IV-CV probe station Training	"All"	SNF Exfab Paul G Allen 151 Ocean
MRC Reactive Ion Etcher mrc	MRC Reactive Ion Etcher Training	Flexible	SNF Paul G Allen L107 Cleanroom	Typically used for sputter etching; Single wafer, direct load system; wafers/ pieces can be directly placed on electrode
Nanospec 210XP nanospec2	Nanospec Training	"All"	SNF Exfab Paul G Allen 104 Stinson	Manual Film Thickness Measurement. Single or dual layer transparent films > 300 Ã
Optomec Printer optomec-printer		Flexible	SNF Exfab Paul G Allen 155A Venice
Oxford Dielectric Etcher oxford-rie	Oxford Dielectric Etcher Training	Flexible	SNF Paul G Allen L107 Cleanroom	4" wafers; can be adopted to do 6" or 8" wafers; pieces need to be bonded to carrier wafers
Oxford III-V etcher Ox-35	Oxford III-V etcher Training	Flexible	SNF Paul G Allen L107 Cleanroom	Metal etching or Metal hard masks are not allowed. 4" wafers; can be adopted to do 6" or 8" wafers; pieces need to be bonded to carrier wafers; Restrictions: III-V materials only.
Plasma Therm Versaline LL ICP Deep Silicon Etcher PT-DSE	Plasma Therm Versaline LL ICP Deep Silicon Etcher Training	Flexible	SNF Paul G Allen L107 Cleanroom	Single wafer; Bosch process for Si etching; Default 4" config; Can be converted to 6" config; pieces need to be attached to carrier wafer; need a support wafer for through wafer etching, can be used for Isotropic Si Etching
Plasma Therm Versaline LL ICP Dielectric Etcher PT-Ox	Plasma Therm Versaline LL ICP Dielectric Etcher Training	Flexible	SNF Paul G Allen L107 Cleanroom	Single wafer; Default 4" config; Can be converted to 6" config; pieces need to be attached to carrier wafer; Restrictions: Can not etch metals or metal oxides with no volatile by-products (shorting & arcing issues)
Plasma Therm Versaline LL ICP Metal Etcher PT-MTL	Plasma Therm Versaline LL ICP Metal Etcher Training	Flexible	SNF Paul G Allen L107 Cleanroom	Single wafer; Default 4" config; Can be converted to 6" config; pieces need to be attached to carrier wafer; Restrictions: Can not etch metals or metal oxides with no volatile by-products (shorting & arcing issues)

Pages