4 inch wafer

Short Name:

4"

The following is a list of equipment where 4 inch round substrates are allowed.

Equipment Tables

Equipment name & NEMO ID	Training Required & Charges	Cleanliness	Location	Notes
SVG Develop Track 2 svgdev2	SVG Resist Develop tracks 1 and 2 Training	"All"	SNF Paul G Allen L107 Cleanroom	Automatic development.
Tystar Bank 2 Tube 5 B2T5 Clean Anneal	Tystar Atmospheric Tube Training	Clean	SNF Paul G Allen L107 Cleanroom
Fiji 3 ALD fiji3	ALD Fiji 3 Training	Flexible	SNF Paul G Allen L107 Cleanroom	Restricted to non-conductive films only
Wet Bench Miscellaneous wbmiscres	Wet Bench Miscellaneous Photoresist Training	Flexible	SNF Paul G Allen L107 Cleanroom	Manual development of resist in beakers and Headway (manual resist spinner). SNF approved developers (acid or base). No solvents!
Matrix Plasma Resist Strip matrix	Matrix Plasma Resist Strip Training	Flexible	SNF Paul G Allen L107 Cleanroom	Single wafer tool with auto loading from a cassette. Pieces need a pocket carrier wafer for transport. Chuck temperature controls wafer heating.
Karl Suss MA-6 Contact Aligner karlsuss2	Contact Aligner Karl Suss MA-6 Training	"All"	SNF Paul G Allen L107 Cleanroom	1:1 Contact Aligner. Backside align.
Nanospec 3 nanospec3	Nanospec 3 Training	"All"	SNF Paul G Allen L107 Cleanroom
Tystar Bank 2 Tube 6 B2T6 Clean Oxide	Tystar Atmospheric Tube Training	Clean	SNF Paul G Allen L107 Cleanroom
MVD mvd	MVD Training	Flexible	SNF Paul G Allen L107 Cleanroom	Reactor located inside glovebox
Wet Bench Resist Strip wbresstrip-1	Wet Bench Resist Strip	Clean (Ge), Semiclean, Flexible	SNF Paul G Allen L107 Cleanroom	Wet Resist Removal: SRS-100 or PRS1000
Xactix Xenon Difluoride Etcher xactix	Xactix Xenon Difluoride Etcher Training	"All"	SNF Paul G Allen L107 Cleanroom	Isotropic Si etching; can be used for backside Si removal on small pieces
Karl Suss MA-6 Contact Aligner karlsuss	Contact Aligner Karl Suss MA-6 Training	"All"	SNF Paul G Allen L107 Cleanroom	1:1 Contact Aligner. Backside align, including IR.
Tystar Bank 3 Tube 9 B3T9 Clean Oxide	Tystar Atmospheric Tube Training	Clean	SNF Paul G Allen L107 Cleanroom
Savannah ALD savannah	ALD Savannah Training	Flexible	SNF Paul G Allen L107 Cleanroom
Wet Bench Clean_res-hf wbclean_res-hf	Wet Bench Clean Piranha/HF/Phosphoric Training	Clean	SNF Paul G Allen L107 Cleanroom	Resist as mask allowed
Plasma Therm Versaline LL ICP Deep Silicon Etcher PT-DSE	Plasma Therm Versaline LL ICP Deep Silicon Etcher Training	Flexible	SNF Paul G Allen L107 Cleanroom	Single wafer; Bosch process for Si etching; Default 4" config; Can be converted to 6" config; pieces need to be attached to carrier wafer; need a support wafer for through wafer etching, can be used for Isotropic Si Etching
ASML PAS 5500/60 i-line Stepper asml	Stepper ASML PAS 5500/60 i-line Training	"All"	SNF Paul G Allen L107 Cleanroom	5:1 reducing stepper
Tystar Bank 1 Tube 1 Anneal B1T1 Flexible Oxide	Tystar Atmospheric Tube Training	Flexible	SNF Paul G Allen L107 Cleanroom
Woollam woollam	Woollam Training	"All"	SNF Paul G Allen L107 Cleanroom
Wet Bench Flexcorr 4 wbflexcorr-4	Wet Bench Flexcorr 1and2 and 3and4 Training	Flexible	SNF Paul G Allen L107 Cleanroom	Manual wet etching of non-standard materials using acids or bases. Hot plate, HF bath, and controlled temperature bath available. GaAs not allowed.

Pages