4 inch wafer

Short Name:

4"

The following is a list of equipment where 4 inch round substrates are allowed.

Equipment Tables

Equipment name & NEMO ID	Training Required & Charges	Cleanliness	Location	Notes
PDS 2010 LABCOTER™ 2 Parylene Deposition System parcoater	Parylene Coater Training	Flexible	SNF Exfab Paul G Allen 155 Mavericks
Aixtron MOCVD - III-N system aix-ccs	MOCVD - III-N Aixtron training	Clean (MOCVD)	SNF MOCVD Paul G Allen 213XA	N and P doping available. For Si clean: SC1, SC2, HF dip. For Sapphire clean: SC1, SC2. For GaN template on Si or Sapphire: Piranha, SC1, SC2.
Aixtron MOCVD - III-V system aix200	MOCVD - III-V Aixtron training	Flexible	SNF MOCVD Paul G Allen 213XA	N and P doping available. For Si clean: SC1, SC2, HF dip. For III-V clean: HCl or HF dip.
First Nano carbon nanotube CVD furnace cvd-nanotube	cvd-nanotube training	Flexible	SNF Exfab Paul G Allen L119 Año Nuevo	Aligned single-walled carbon nanotube growth with ST-cut quartz substrates (available from SNF stockroom);1-15 single-walled carbon nanotubes per micron density
Aixtron Black Magic graphene CVD furnace aixtron-graphene	CVD graphene furnace Aixtron Black Magic training	Flexible	SNF Exfab Paul G Allen L119 Año Nuevo
Optomec Printer optomec-printer		Flexible	SNF Exfab Paul G Allen 155A Venice
Plasmaetch PE-50 plasma-etch	Plasmaetch PE-50 Training	Flexible	SNF Exfab Paul G Allen 155A Venice	Low power, high pressure plasma; low bias, minimal damage. Often used for surface treatment.
Lesker Sputter lesker-sputter	Sputter Lesker 1&2 Training	Flexible	SNF Exfab Paul G Allen 155A Venice	reactive O2/N2 sputtering, substrate bias, substrate heating, co-sputter
AJA Evaporator aja-evap	Evaporator AJA training	Flexible	SNF Exfab Paul G Allen 155A Venice	For more than 300nm deposition, please contact Graham Ewing<grahamj.ewing@stanford.edu> in advance
DISCO Wafer Saw DISCO wafersaw	Wafersaw DISCO training	Flexible	SNF Exfab Paul G Allen 159 Capitola
Sinton Lifetime Tester sinton-lifetime-tester	Sinton Lifetime Tester Training	Flexible	SNF Exfab Paul G Allen 151 Ocean
LEI1500 Contactless Sheet Resistance Mapping eddycurrent	LEI1500 Contactless Sheet Resistance Mapping Training	"All"	SNF Exfab Paul G Allen 151 Ocean
Micromanipulator6000 IV-CV probe station micromanipulator6000	micromanipulator6000 IV-CV probe station Training	"All"	SNF Exfab Paul G Allen 151 Ocean
Probe Station P200L Probe Station P200L	Probe Station P200L Training	"All"	SNF Exfab Paul G Allen 151 Ocean
Savannah ALD savannah	ALD Savannah Training	Flexible	SNF Paul G Allen L107 Cleanroom
Wet Bench Clean_res-hf wbclean_res-hf	Wet Bench Clean Piranha/HF/Phosphoric Training	Clean	SNF Paul G Allen L107 Cleanroom	Resist as mask allowed
Plasma Therm Versaline LL ICP Deep Silicon Etcher PT-DSE	Plasma Therm Versaline LL ICP Deep Silicon Etcher Training	Flexible	SNF Paul G Allen L107 Cleanroom	Single wafer; Bosch process for Si etching; Default 4" config; Can be converted to 6" config; pieces need to be attached to carrier wafer; need a support wafer for through wafer etching, can be used for Isotropic Si Etching
ASML PAS 5500/60 i-line Stepper asml	Stepper ASML PAS 5500/60 i-line Training	"All"	SNF Paul G Allen L107 Cleanroom	5:1 reducing stepper
Tystar Bank 1 Tube 1 Anneal B1T1 Flexible Oxide	Tystar Atmospheric Tube Training	Flexible	SNF Paul G Allen L107 Cleanroom
Woollam woollam	Woollam Training	"All"	SNF Paul G Allen L107 Cleanroom

Pages