Skip to content Skip to navigation

2 inch wafer

Short Name:

2"

The following is a list of equipment where 2 inch round substrates are allowed.

Equipment name & NEMO ID	Training Required & Charges	Cleanliness	Location	Notes
HMDS Vapor Prime Oven, YES yes	YES Prime Oven Training	"All"	SNF Paul G Allen L107 Cleanroom	Two programs: Singe and HMDS prime or Singe only. No Resist allowed!
Intlvac Evaporator Intlvac_evap	Evaporator Intlvac Training	Clean, Semiclean	SNF Paul G Allen L107 Cleanroom
Karl Suss MA-6 Contact Aligner karlsuss	Contact Aligner Karl Suss MA-6 Training	"All"	SNF Paul G Allen L107 Cleanroom	1:1 Contact Aligner. Backside align, including IR.
Karl Suss MA-6 Contact Aligner karlsuss2	Contact Aligner Karl Suss MA-6 Training	"All"	SNF Paul G Allen L107 Cleanroom	1:1 Contact Aligner. Backside align.
Keyence Digital Microscope VHX-6000 keyence	Microscope Keyence Training	"All"	SNF Exfab Paul G Allen 104 Stinson
KJL Evaporator 1	KJL Evaporator 1 Training		SNSF NPC Spilker suite 6
Laurell Manual Resist Spinner laurell-R	Laurell Manual Resist Spinner Training	"All"	SNF Paul G Allen L107 Cleanroom	SU-8, LOL, Ebeam resists allowed. No Acetone allowed.
LEI1500 Contactless Sheet Resistance Mapping eddycurrent	LEI1500 Contactless Sheet Resistance Mapping Training	"All"	SNF Exfab Paul G Allen 151 Ocean
Lesker Sputter lesker-sputter	Sputter Lesker 1&2 Training	Flexible	SNF Exfab Paul G Allen 155A Venice	reactive O2/N2 sputtering, substrate bias, substrate heating, co-sputter
Lesker2 Sputter lesker2-sputter	Sputter Lesker 1&2 Training	Semiclean	SNF Paul G Allen L107 Cleanroom	reactive O2/N2 sputtering, substrate bias, substrate heating, co-sputter
micromanipulator6000 IV-CV probe station micromanipulator6000	micromanipulator6000 IV-CV probe station Training	"All"	SNF Exfab Paul G Allen 151 Ocean
MRC Reactive Ion Etcher mrc	MRC Reactive Ion Etcher Training	Flexible	SNF Paul G Allen L107 Cleanroom	Typically used for sputter etching; Single wafer, direct load system; wafers/ pieces can be directly placed on electrode
MVD mvd	MVD Training	Flexible	SNF Paul G Allen L107 Cleanroom	Reactor located inside glovebox
Nanospec 210XP nanospec2	Nanospec Training	"All"	SNF Exfab Paul G Allen 104 Stinson	Manual Film Thickness Measurement. Single or dual layer transparent films > 300 Ã
Nanospec 3 nanospec3	Nanospec 3 Training	"All"	SNF Paul G Allen L107 Cleanroom
Oven (White) white-oven	White Oven Training	Flexible	SNF Paul G Allen L107 Cleanroom	For LOL2000 bake or bakes which are not allowed in the other ovens and need higher temperatures, up to 200C, programmable.
Oven 110°C post-bake oven110	Resist Postbake Oven 110°C Training	"All"	SNF Paul G Allen L107 Cleanroom	Bakes wafers with resist after the development, called post-bake.
Oven 90°C prebake oven90	Resist Prebake Oven 90°C Training	"All"	SNF Paul G Allen L107 Cleanroom	Bakes wafers after resist coating.
Oven BlueM 200°C to 430°C bluem	Blue M Oven Training	Flexible	SNF Paul G Allen L107 Cleanroom	Convection in N2. Cure. Programmable.
PDS 2010 LABCOTER™ 2 Parylene Deposition System parcoater	Parylene Coater Training	Flexible	SNF Exfab Paul G Allen 155 Mavericks

Pages

Equipment name & NEMO ID	Technique	Cleanliness	Primary Materials Etched	Other Materials Etched	Material Thickness Range	Materials Lab Supplied	Materials User Supplied	Minimum Resolution	Exposure Wavelength	Mask Size	Max Exposure Area	Resist	Process Temperature Range	Chemicals	Gases	Sample Size Limits	Resolution Notes	Substrate Size	Substrate Type	Maximum Load
HMDS Vapor Prime Oven, YES yes	Photolithography > Wafer preparation before resist > Singe Photolithography > Wafer preparation before resist > Wafer Prime (HMDS)	"All"											150 ºC	[(CH₃)₃Si]₂NH				Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)
Intlvac Evaporator Intlvac_evap	Deposition > Physical Vapor Deposition (PVD) > Evaporation	Clean, Semiclean			0.00 - 0.50 μm	Al Co Cr Ge Hf Nb Ni Pd Si Ta Ti V W Zr Moly												Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2)	12 4 inch wafers, 2 6 inch wafers
Karl Suss MA-6 Contact Aligner karlsuss	Photolithography > Exposure > Contact Aligner	"All"							365 nm	4 inch, 5 inch, 7 inch	5 inch mask = 4 inch, 7 inch mask = 6 inch, 4 inch mask = 3 inch							Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs) , (Various)
Karl Suss MA-6 Contact Aligner karlsuss2	Photolithography > Exposure > Contact Aligner	"All"							365 nm or 405 nm	4 inch, 5 inch, 7 inch	5 inch mask = 4 inch, 7 inch mask = 6 inch, 4 inch mask = 3 inch							Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs) , (Various)
Keyence Digital Microscope VHX-6000 keyence	Characterization > Surface Analysis > Microscopy	"All"																Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)
KJL Evaporator 1	Deposition > Physical Vapor Deposition (PVD) > Evaporation				200.00 nm	Al Au Cr Cu Ge Ni Pd Pt Ti V									Ar			Pieces 2" 3" 4" 6"		1
Laurell Manual Resist Spinner laurell-R	Photolithography > Resist coat > Resist Coat (manual)	"All"										Resists SU-8 LOL		(C₅O₂H₈)_n				Pieces 2" 3" 4" 6"
LEI1500 Contactless Sheet Resistance Mapping eddycurrent	Characterization > Sheet Resistance Measurement	"All"														8 in wafer	Sensor Transducer Size is 14 mm diameter	2" 3" 4" 6" 8"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various)	1 wafer(2" to 8")
Lesker Sputter lesker-sputter	Deposition > Physical Vapor Deposition (PVD) > Sputtering	Flexible				Ag Al AlSi Au Co Cr Cu Fe Nb Ni Pd Si SiO₂ Ta Ti TiN W Alumina ITO	CoFeB Ge Hf In₂O₃ LaB₆ Ru Sc Sn TiN WO₃ ZnO₃ ZrY GST Hafnia Moly Ti Tungsten											Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	1 4 inch wafer, 1 6 inch wafer
Lesker2 Sputter lesker2-sputter	Deposition > Physical Vapor Deposition (PVD) > Sputtering	Semiclean			1.00 μm	Ag Al AlSi Cr Ge Pd Ru Sc Si SiO₂ Sn Ta Ti TiN W Alumina ITO Moly							°C - 800 °C		Ar N₂ O₂			Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)	one 4 inch wafer, one 6 inch wafer
micromanipulator6000 IV-CV probe station micromanipulator6000	Characterization	"All"																Pieces 2" 3" 4"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs) , (LiNb) , (Various)	1x4" wafer
MRC Reactive Ion Etcher mrc	Etching > Dry Etching > Capacitively Coupled Plasma Etching (CCP) > Reactive Ion Etching (RIE)	Flexible	Metal oxides Metals Metals or metal compounds with volatile byproducts Metals or metal compounds without volatile byproducts Au Ni poly(p-xylylene) Pt Si Si3N4 SiO₂ Ti Various 2D Materials Various Dielectrics Various polymers PI Resist	Al AlAs AlGaAs AlGaN AlInP AlN AlSi BiFeO₃ C C C Co CoFeB Cr Cu Er Fe Ga₂O₃ GaAs GaN GaP GaPN Ge Hf HfN III-N materials III-V materials In In₂O₃ InAlN InAs InGaAlN InGaAs InGaAsN InGaN InGaP InN InP InPN InSb Ir LaB₆ LiNb Nb Ni_xO_y NiSi Pd Ru Sc SiC SiGe SiO SiON Sn SnO₂ SrO SrRuO Ta Ta₂O₅ TaN TiN V Various C-based Various polymers W WO₃ WSi₂ Y ZnO₃ Zr ZrY Alumina AZO Hafnia ITO LLZO Moly Moly Oxide Poly Silicon Ti Tungsten Titania YSZ Zirconia											Ar CHClF₂ CHF₃ O₂ SF₆			Pieces 2" 3" 4" 6"		1
MVD mvd	Deposition > Atomic Layer Deposition (ALD) > Thermal ALD	Flexible			1.00 Å - 50.00 nm	C₉H₂₃NO₃Si Various Dielectrics Alumina DETA Hafnia ODS SAMS							24 °C - 150 °C		Ar			Pieces 2" 3" 4" 6" 8"
Nanospec 210XP nanospec2	Characterization > Reflectometry	"All"																Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)
Nanospec 3 nanospec3	Characterization > Reflectometry	"All"																Pieces 2" 3" 4" 6"
Oven (White) white-oven	Photolithography > Resist Bake > Oven Bake	Flexible											0 °C - 200 °C					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)
Oven 110°C post-bake oven110	Photolithography > Resist Bake > Oven Bake > Resist Post Bake	"All"											110 ºC					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (SiC) , (GaN) , (III-V) , (GaAs)
Oven 90°C prebake oven90	Photolithography > Resist Bake > Oven Bake > Resist Prebake	"All"											90 ºC					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs)
Oven BlueM 200°C to 430°C bluem	Photolithography > Resist Bake > Oven Bake	Flexible											0 °C - 430 °C					Pieces 2" 3" 4" 6"	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (Ge) , (GaN) , (III-V) , (GaAs) , (Various)
PDS 2010 LABCOTER™ 2 Parylene Deposition System parcoater	Deposition	Flexible				poly(p-xylylene)												Pieces 2" 3" 4" 6" 8" Cones Disks Other	(Si) , (SiGe) , (SiO2) , (Al₂O₃) , (SiO₂) , (SiC) , (GaN) , (III-V) , (GaAs) , (Various) , (Various) , (LiNb) , (Various)

Pages